陜西海特克復合材料有限公司

公司簡介

陜西海特克復合材料有限公司是中國玻纖企業——陜西華特（集團）公司的獨資子公司。成立于1985年，專業從事玻璃鋼復合材料產品的開發與生產。現擁有SMC片材、模壓、拉擠、RTM（注射）、噴射及手糊等多種玻璃鋼成型工藝。公司技術力量雄厚，設備先進，具有較強的產品開發及生產能力。產品廣泛應用于汽車、通訊、鐵路、公路、體育及游樂設施等諸多領域。公司秉承“顧客要求神圣，質量獲取未來”的質量方針，以優質的產品、優良的服務和真誠的合作，贏得了新老用戶的一致好評。（玻璃鋼天線罩出口韓國、日本、印度等國。）

Introduction

Shaanxi HYTEC Composite Co., Ltd. is a exclusive investment subsidiary company of the Chinese famous fiberglass enterprise---HuaTek (Group) Corporation. HYTEC company is established in 1985, specially in charge of development and production for FRP composite material. HYTEC has many kinds of molding technologies for FRP, such as SMC sheet, compression, pultursion profiles, RTM (injection molding), spray-up and hand lay-up. Our company has an abundance of technology, advanced equipment, and a stronger capacity of development and production. Products used widely in the fields of automobile, communication, railway, expressway, sports and amusement facilities. With the faith of “consumer is primary, quality gains future ”, our products have been well accepted by consumers with excellent quality, the best service, and sincere cooperation.

一、 SMC模壓生產線

公司SMC模壓成型生產線建于1995年，擁有100噸到1800噸不同噸位的模壓機五臺，年可生產各種產品25萬件以上。目前生產的SMC重卡汽車散熱器罩、鐵路信號箱系列產品、通訊用天線罩、電纜橋架、高速路防眩板、體育場看臺座椅等產品，質量可靠，用戶滿意。

二、 SMC片材生產線

公司SMC片材生產線，年生產能力達萬噸以上。可生產普通型、阻燃型、低密度型、可透波型、電器型等多種不同用途的片材。其性能指標優良，質量穩定，從而保證了模壓產品的質量要求。

三、 連續拉擠生產線

公司擁有數條性能優良的拉擠生產線，主要從事通訊用天線罩及各種形材的研發與生產，特別在開發通訊用天線罩的過程中取得突破，形成優勢。生產的薄壁大口徑（Φ250、厚度3mm）天線罩，國內首創，產品受到國內外用戶的一致好評。

四、 噴射、手糊生產線

噴射是我們1986年引進美國的玻璃鋼成型工藝，專門從事大型、異型玻璃鋼產品的開發與生產。結合傳統的手糊工藝，先后開發生產了大型游樂設施水滑道、乒乓球臺面、籃球板、大型天線罩等產品，其中中國南戴河連續多年的水滑道游樂設施均為我們生產。產品質量水平，國內。

 SMC Compression Molding Production Line

SMC compression molding production line was built in 1995, possessed different press for 5 pieces from 100 tons to 1800 tons, annual production capacity is above 250-thousand pieces. At present our main products, including SMC radiatior guard for truck, signal box for railway, antenna cover for communication, crane span structure for electric cable, fender for expressway, and FRP chairs for stadium, have been well accepted by consumer in excellent quality.

 SMC Sheet Production Line

SMC sheet production line has annual production capacity of more than 10-thousand tons. We can provide many SMC sheets for different uses, such as ordinary sheet, flame retardant sheet, low density sheet, microwave transmissible sheet, and electronic sheet. Since their good specifications and stable quality, the quality requirement for SMC compression molding product has been guaranteed.

 Continuous Pultrusion Production Line

We have a few of FRP continuous pultrusion production line, specialized to in charge of development and production for communication antenna cover and all kinds of profiles. We have been special superior in processing FRP antenna cover for communicaiton. The antenna cover of thin thickness and big calibre (Φ250、thickness 3mm ) is the only new product in our country.. Meanwhile, the products have been well accepted by consumers from internal and external country.

 Spray-up and Hand Lay-up Production Line

The spray-up is our first technical process, introduced from the United States in 1986. specialized in developing and producing of large and profiled FRP products. Combining the traditional hand lay-up technology, we have developed slide chute for large amusement facility, table top for table tennis, backboard for basketball, large antenna cover. The slide chutes of the Nandaihe in China is produced by our company for these years. The quality of our products is in the lead level in domestic market.